VA80 / ST7 Nut Forming Dies , Carbide Die Cutting Mould Robust Construction
High wear resistance
Cemented carbide drawing die, After the unique advanced technology processing of raw materials,
it can work in the higher than the temperature of the human body maintain long-term pull pull out
the wire size is not easy to change,
In the process of drawing of metal wire, steel and nonferrous metal adhesive of drawing die is small,
so as to make the cemented carbide drawing die with high durability, thus improve the metal surface
is bright and clean degree,
Heat conduction performance of high corrosion resistance
Cemented carbide drawing die, on the wire drawing process, the heat generated by cemented
carbide die conduction, lower friction coefficient, in the wet drawing lubrication, the cooling lubricant
with good corrosion resistance, wet lubrication drawing in acid solution, is more effective!
Benefits
Available for most wire drawing operations.
Offered in a wide range of diameters.
For use in wet and dry drawing applications.
For use in pressure and non-pressure applications.
Typical application areas
Copper wire
Aluminum wire
Tungsten wire
Molybdenum wire Stainless steel wire
Coated steel wire
Special alloy and high performance alloy wire
Precious metal wire
Various other ferrous and non-ferrous metal wire types
FAQ
Production note
1. Select the tungsten steel materials and specifications size to make the screws or nuts mold correctly.
2.According to the difference of the forming difficulty,size,length of screws and nuts,rational design of the mold structure,multi-station and nut mold should be allocated on a reasonable basis the upsetting deformation and the number of molding.
3.The mold fine craftsmanship,accurate size,bore diameter to match the finish mirror requirements.
4.Interference voltage distribution margin,select the appropriate alloy taper size.
5.Shell steel sleeve must be rigid and good heated,and the hardness range should be between 42°c-48 °c after the vacuum heat treatment.
6.Keep the mold bore and the wire surface cleaning and smoothing, cold drawn wire must be nailed after ball annealing treatment.
7.We use diamond grinding wheel to mill the cycle and the end of tungsten.
8.The technicians adjusting the master must have good technical level.
Common questions in using screw and nut mold
1.Mold and structural design experience with the master, not calculated the number of cold heading,analyzing the force of the mold deformation than the unreasonable distribution.
2.The cleanliness of the mold, the inner hole finish is not enough.
3.The rigidity of shell sleeve material, the heat resistance,and the heat treatment hardness are unreasonable.
4.In order to save the cost of production, they selected poor quality tungsten carbide steel and wire rod, alloy specifications and steal material nailing serious wheels unreasonable.
5.They collider in unsuitable way, without replacing lubricants and checking machine long-term.
We specialize in series of tungsten carbide products, such as cold heading dies, brazed tips, disc cutters, plates and plates, saw tips, round rods, rock drilling bits and buttons, milling tools, geological exploration drill tools and so on. Our products are exported to UK, European, Japan, Taiwan and South-east Asia etc.
Chongqing Henghui Precision Mold Co., Ltd. has CNC lathes, CNC machining centers, CNC Cylindrical Grinding Machine, CNC EDM machine, CNC Cutting Machine, Milling Andam Drilling Machine ,etc.We also have various types testing equipment,such as Rockwell Hardness Tester,Projector,3D Image Measuring Instrument,etc. Henghui using high-quality tungsten carbide material and professional vacuum heat treatment.We design,manufacturing and supply high-quality precision molds for customers who engaged in cold heading and hot upsetting industries.About our molds , the relative standard deviation can be controlled within 0.005mm, concentricity can be controlled within 0.01mm. Strict accordance with ISO9001:2015 quality management system requirements of the operation,can ensure provide timely and high-quality service for our customers.Our products has exported to Southeast Asia,Europe and the United States ."Customer first, quality first, technology first, dedicated service" is our consistent operating principles.Warmly welcome to negotiate business with us.
FAQ
|
Q1:Are you a factory or trading company?
|
|
A1:We are a factory, Henghui has 7,00 square meters of manufacturing plants and R&D bases
|
|
Q2:Where is your factory located? How can I visit there?
|
|
A2:Our factory is located in Hailong Village, Baishiyi Town, Jiulongpo District, Chongqing City, China. All our clients, from home or abroad, are warmly welcome to visit us at anytime!
|
|
Q3:What is the material of your products?
|
|
A3:The material is carbide and high speed steel,like VA80,G6,ST7,DC53,SKD11,D2,SKH-9,SKH-51, or as our clients’ requirements.
|
|
Q4: The maximum press your factory have available ?
|
|
A4: Our factory has 30T,60T,160T punching machines
|
|
Q5::How does your factory do regarding quality control?
|
|
A5: Quality is priority. we having gained ISO 9001 Quality Authentication Certificate.
|
